Landmark Vista

This update makes your Landmark Vista program Y2K compliant. Please note that you must have three formatted diskettes for this update. (To print these instructions, select File > Print on your Web browser’s menu bar.) IMPORTANT: After you have downloaded this update you will be required to save it to diskette before it can be applied. PLEASE HAVE THREE BLANK, FORMATED DISKETTES AVAILABLE. Click on V111dsk1.exe. If the 'File Download' box appears, make sure the option to 'save to disk' is selected. (this will allow the program to be saved to your hard drive). The Save As dialog box displays the name of the download file in the File name field. Use this dialog box to save the file to your Windows desktop. Click the up one level button (the yellow folder with the up arrow) until 'Desktop' is in the 'save in' box then click Save. Wait for the download to complete before proceding to the next step. This process could take some time so please be patient. Click on V111dsk2.exe and repeat steps 2-4 for this file. Repeat for V111dsk3.exe. When all three files have been downloaded close all windows and log off of the internet. You should now see three new icons on your desktop. Label your blank diskettes, 'Vista Update Disk 1', 'Vista Update Disk 2' and 'Vista Update Disk 3'. Insert the disk Labeled 'Vista Update Disk 1' into your computer's floppy disk drive and then double click on the new icon on your desktop labeled 'V111dsk1'. When the PKSFX dialog box diaplays, click the button labeled 'Finish'. This will 'extract' the update program to the diskette. When the process is done a message displays saying 'Extraction Complete'. Click 'OK'. You've now finished copying disk one of the update files to a diskette. To create disks 2 and 3 of the update, click on 'V111dsk2' and 'V111dsk3', respectively, and repeat steps 8 and 9, using the disks labeled 'Vista Update Disk 2' and 'Vista Update Disk 3'. Once you’ve prepared the three update diskettes, you are ready to apply the update. Insert the disk labeled Vista Update Disk 1 into the A:\ drive. Click the Start button on the task bar, select Run, and next to the word Open type A:\Setup.exe. Click the OK button to start the update process.   Back